Step-by-Step: Assembling Your Stellar Falcon
Just got your Stellar Falcon? This guide will walk you through every step of unboxing and assembly, with tips to help you set up your new ride with confidence and comfort. Whether you're new to ebikes or a seasoned rider, you'll find everything you need right here.
🔧 What’s in the Box
- Stellar Falcon ebike (frame + rear wheel attached)
- Front wheel, pedals, headlight, charger
- Stem cap, reflectors, stickers, user manual
- Quick start guide and essential tools
1. Unbox Your Bike
- Open the box by pinching and removing the clips
- Carefully lift the bike out (two people recommended)
- Lay out all parts and tools to confirm everything's included
2. Install Handlebars & Headlight
- Remove the stem plate with a 4mm tool
- Position and lightly tighten the handlebars
- Attach headlight with a 3mm Allen key
- Connect the light to the wiring harness (match pins)
3. Attach the Front Wheel & Fender
- Remove the caliper spacer and axle support
- Insert the front wheel, making sure the rotor fits the caliper
- Secure the thru axle with a 6mm Allen key
- Install the front fender using the bolts on the fork
4. Add Pedals & Adjust the Stem
- Thread the pedals by hand, then tighten with a crescent wrench
- Set the stem angle for a comfortable riding posture
- Align the handlebars with the front wheel and tighten the bolts
5. Dial in Your Fit & Power On
- Adjust your seat height so your leg has a slight bend at full extension
- Turn on the bike by pressing and holding the power button on the display
- Customize assist level, throttle settings, and lighting from the display
🎉 You're Ready to Ride
Your Stellar Falcon is now fully assembled and personalized to your needs. If you have questions, visit our Resources page or contact support. Happy riding!
